Assessment of the sustainability and producibility of adobe constructions reinforced with Ca-based binders: Environmental life cycle analysis (LCA) and 3D printability

Basit Öğe Kaydı
dc.authoridBEYHAN, Figen/0000-0002-4287-1037
dc.authoridKaplan, Gokhan/0000-0001-6067-7337
dc.authoridKilic Demircan, Ruya/0000-0001-7318-9383
dc.contributor.authorGenc, Gokhan
dc.contributor.authorDemircan, Ruya Kilic
dc.contributor.authorBeyhan, Figen
dc.contributor.authorKaplan, Gokhan
dc.date.accessioned2025-03-23T19:37:55Z
dc.date.available2025-03-23T19:37:55Z
dc.date.issued2024
dc.departmentSinop Üniversitesi
dc.description.abstractThis study investigated the usability of adobe samples reinforced with calcium-based binders in a 3D-printed technique. These adobe samples' physical, mechanical, durability and microstructure characteristics were investigated and their 3D printability characteristics experimentally. In the case of adobe production by 3D -print-ing method, the compressive strength decreased by 9-33 % compared to mold casting. While the thermal con-ductivity coefficient of adobe samples varied between 0.833 and 1.421 W/mK, the thermal conductivity was reduced by 43 % thanks to the preference for gypsum. Within the scope of the LCA analysis, the slightest effect in terms of environmental damage was observed in mixtures containing gypsum compared to cement and slaked lime mixtures. As a result, it was determined that adobe's physical and mechanical characteristics could be improved by using gypsum, lime and cement, and these mixtures can be used in 3D-printing. It was determined that more sustainable adobe production is possible with gypsum and lime.
dc.identifier.doi10.1016/j.scitotenv.2023.167695
dc.identifier.issn0048-9697
dc.identifier.issn1879-1026
dc.identifier.pmid37832664
dc.identifier.scopus2-s2.0-85173860731
dc.identifier.scopusqualityQ1
dc.identifier.urihttps://doi.org/10.1016/j.scitotenv.2023.167695
dc.identifier.urihttps://hdl.handle.net/11486/6045
dc.identifier.volume906
dc.identifier.wosWOS:001097203100001
dc.identifier.wosqualityQ1
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.indekslendigikaynakPubMed
dc.language.isoen
dc.publisherElsevier
dc.relation.ispartofScience of the Total Environment
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WOS_20250323
dc.subjectAdditive manufacturing
dc.subjectAdobe
dc.subjectEarth -based material
dc.subjectLife cycle assessment
dc.subjectAfm mono sulfate hydrate
dc.subjectCC calcite
dc.titleAssessment of the sustainability and producibility of adobe constructions reinforced with Ca-based binders: Environmental life cycle analysis (LCA) and 3D printability
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
PubMed İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu