Parametric Optimization for Improving the Machining Process of Cu/Mo-SiCP Composites Produced by Powder Metallurgy

Basit Öğe Kaydı
dc.authoridSarikaya, Murat/0000-0001-6100-0731
dc.authoridUSCA, Usame Ali/0000-0001-5160-5526
dc.authoridGupta, Munish/0000-0002-0777-1559
dc.authoridSap, Emine/0000-0002-7739-0655
dc.authoridPimenov, Danil/0000-0002-5568-8928
dc.authoridKUNTOGLU, MUSTAFA/0000-0002-7291-9468
dc.authoridMia, Mozammel/0000-0002-8351-1871
dc.contributor.authorSap, Emine
dc.contributor.authorUsca, Usame Ali
dc.contributor.authorGupta, Munish Kumar
dc.contributor.authorKuntoglu, Mustafa
dc.contributor.authorSarikaya, Murat
dc.contributor.authorPimenov, Danil Yurievich
dc.contributor.authorMia, Mozammel
dc.date.accessioned2025-03-23T19:26:27Z
dc.date.available2025-03-23T19:26:27Z
dc.date.issued2021
dc.departmentSinop Üniversitesi
dc.description.abstractThe features of composite materials such as production flexibility, lightness, and excellent strength put them in the class of materials that attract attention in various critical areas, i.e., aerospace, defense, automotive, and shipbuilding. However, the machining of composite materials displays challenges due to the difficulty in obtaining structural integrity. In this study, Cu/Mo-SiCP composite materials were produced by powder metallurgy with varied reinforcement ratios and then their machinability was investigated. In machinability experiments, the process parameters were selected as cutting speed (v(C)), feed rate (f), depth of cut (a(P)), and reinforcement ratio (R-R). Two levels of these parameters were taken as per the Taguchi's L8 orthogonal array, and response surface methodology (RSM) is employed for parametric optimization. As a result, the outcomes demonstrated that R-R = 5%, f = 0.25 mm/rev, a(P) = 0.25 mm, v(C) = 200 m/min for surface roughness, R-R = 0%, f = 0.25 mm/rev and a(P) = 0.25 mm and v(C) = 200 m/min for flank wear and R-R = 0%, f = 0.25 mm/rev, a(P) = 0.25 mm, v(C) = 150 m/min for cutting temperature for cutting temperature and flank wear should be selected for the desired results. In addition, ANOVA results indicate that reinforcement ratio is the dominant factor on all response parameters. Microscope images showed that the prominent failure modes on the cutting tool are flank wear, built up edge, and crater wear depending on reinforcement ratio.
dc.identifier.doi10.3390/ma14081921
dc.identifier.issn1996-1944
dc.identifier.issue8
dc.identifier.pmid33921333
dc.identifier.scopus2-s2.0-85104647918
dc.identifier.scopusqualityQ2
dc.identifier.urihttps://doi.org/10.3390/ma14081921
dc.identifier.urihttps://hdl.handle.net/11486/4688
dc.identifier.volume14
dc.identifier.wosWOS:000644551300001
dc.identifier.wosqualityQ1
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.indekslendigikaynakPubMed
dc.language.isoen
dc.publisherMdpi
dc.relation.ispartofMaterials
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/openAccess
dc.snmzKA_WOS_20250323
dc.subjectCu/Mo-SiCP
dc.subjectmetal matrix composite
dc.subjectturning
dc.subjectmachinability
dc.subjectparameter optimization
dc.titleParametric Optimization for Improving the Machining Process of Cu/Mo-SiCP Composites Produced by Powder Metallurgy
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
PubMed İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu