The effect of addition of hBN nanoparticles to nanofluid-MQL on tool wear patterns, tool life, roughness and temperature in turning of Ni-based Inconel 625

Basit Öğe Kaydı
dc.authoridSIRIN, SENOL/0000-0002-3629-9003
dc.authoridSarikaya, Murat/0000-0001-6100-0731
dc.contributor.authorYildirim, Cagri Vakkas
dc.contributor.authorSarikaya, Murat
dc.contributor.authorKivak, Turgay
dc.contributor.authorSirin, Senol
dc.date.accessioned2025-03-23T19:37:44Z
dc.date.available2025-03-23T19:37:44Z
dc.date.issued2019
dc.departmentSinop Üniversitesi
dc.description.abstractNickel-based Inconel 625 is employed in critical applications because of its excellent properties. But the machinability of this material is very poor. In recent years, the use of minimum quantity lubrication has gained prominence to improve machining performance without increasing the oil. However, pure-MQL may be insufficient for machining of difficult-to-machine materials. This paper focused on the development of nano-MQL by adding ISBN nanoparticles compared to pure-MQL and dry machining in turning of Inconel 625. Tool life, surface roughness, tool wear and tool-chip interface temperature were analyzed. Wear mechanisms were evaluated by SEM photographs and EDX analysis. The results showed that; 0.5 vol% hBN nanofluid has produced promising results for low tool wear and roughness and high tool life.
dc.description.sponsorshipErciyes University co (Turkey) Research Fund [FBA-2018-8074]
dc.description.sponsorshipThe authors acknowledge with thanks the Erciyes University co (Turkey) Research Fund for financial support of this experimental study (Project Number: FBA-2018-8074).
dc.identifier.doi10.1016/j.triboint.2019.02.027
dc.identifier.endpage456
dc.identifier.issn0301-679X
dc.identifier.issn1879-2464
dc.identifier.scopus2-s2.0-85061963020
dc.identifier.scopusqualityQ1
dc.identifier.startpage443
dc.identifier.urihttps://doi.org/10.1016/j.triboint.2019.02.027
dc.identifier.urihttps://hdl.handle.net/11486/5999
dc.identifier.volume134
dc.identifier.wosWOS:000463123400043
dc.identifier.wosqualityQ1
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherElsevier Sci Ltd
dc.relation.ispartofTribology International
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WOS_20250323
dc.subjectNano-fluid MQL
dc.subjectHexagonal boron nitride
dc.subjectTool wear
dc.subjectSurface roughness
dc.titleThe effect of addition of hBN nanoparticles to nanofluid-MQL on tool wear patterns, tool life, roughness and temperature in turning of Ni-based Inconel 625
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu