Multi-response Optimization of Cutting Parameters for Hole Quality in Drilling of AISI 1050 Steel

Basit Öğe Kaydı
dc.authoridSarikaya, Murat/0000-0001-6100-0731
dc.authoridDilipak, Hakan/0000-0003-3796-8181
dc.contributor.authorMeral, Guven
dc.contributor.authorSarikaya, Murat
dc.contributor.authorDilipak, Hakan
dc.contributor.authorSeker, Ulvi
dc.date.accessioned2025-03-23T19:42:21Z
dc.date.available2025-03-23T19:42:21Z
dc.date.issued2015
dc.departmentSinop Üniversitesi
dc.description.abstractIn this study, the surface roughness, dimensional accuracy, and circular and cylindrical deviations characterizing the hole quality were investigated experimentally. AISI 1050 steel in experiments was chosen as reference material due to its extensive applications in many areas. Uncoated and TiAlN coated by physical vapor deposition (PVD) method HSS twist drills with different diameters were used. Experiments were conducted on a CNC vertical machining center under dry condition with different cutting speeds and feed rates. The hole depth was 17 mm to ensure L < 3D condition. After each experiment, hole properties such as surface roughness, dimensional accuracy, circular deviation, and axial misalignment between inlet and outlet holes (cylindrical deviation), all of those that show the hole quality, were measured, and the results were evaluated. In addition to experimental analysis, a statistical analysis was carried out to indicate the effects of drilling parameters on test results. Process parameters such as tool type, drill diameter, feed rate, and cutting speed were optimized with consideration of multiple performance characteristics using desirability functional analysis. As a result, coated tools compared with uncoated tools gave positive results for each evaluation criterion. As the most important parameter on surface roughness (Ra) was drill diameter, the most effective parameter on dimensional accuracy, and circular and cylindrical deviations was cutting speed for both uncoated and coated tools except from cylindrical deviation occurring in uncoated drill.
dc.identifier.doi10.1007/s13369-015-1854-z
dc.identifier.endpage3722
dc.identifier.issn2193-567X
dc.identifier.issn2191-4281
dc.identifier.issue12
dc.identifier.scopus2-s2.0-84946600509
dc.identifier.scopusqualityQ1
dc.identifier.startpage3709
dc.identifier.urihttps://doi.org/10.1007/s13369-015-1854-z
dc.identifier.urihttps://hdl.handle.net/11486/6772
dc.identifier.volume40
dc.identifier.wosWOS:000364971200027
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherSpringer Heidelberg
dc.relation.ispartofArabian Journal For Science and Engineering
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WOS_20250323
dc.subjectMetallic material
dc.subjectMetal working
dc.subjectDrilling
dc.subjectHole quality
dc.subjectOptimization
dc.subjectANOVA
dc.titleMulti-response Optimization of Cutting Parameters for Hole Quality in Drilling of AISI 1050 Steel
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu