Study on turning performance of PVD TiN coated Al2O3+TiCN ceramic tool under cutting fluid reinforced by nano-sized solid particles

Basit Öğe Kaydı
dc.authoridSIRIN, SENOL/0000-0002-3629-9003
dc.authoridSarikaya, Murat/0000-0001-6100-0731
dc.contributor.authorKivak, Turgay
dc.contributor.authorSarikaya, Murat
dc.contributor.authorYildirim, Cagri Vakkas
dc.contributor.authorSirin, Senol
dc.date.accessioned2025-03-23T19:41:10Z
dc.date.available2025-03-23T19:41:10Z
dc.date.issued2020
dc.departmentSinop Üniversitesi
dc.description.abstractDue to their excellent chemical stability, hardness and abrasion resistance, ceramic cutting tools are suitable for operations at very high cutting speeds, which play a decisive role in high productivity. Thanks to these properties, they are significantly resistant to high temperatures occurred in the cutting zone. However, after a certain point, excessive temperature rise in the cutting zone brings some problems. This is seen as a problem that should be overcome as it affects negatively machining efficiency. However, the poor resistance of ceramic tools to thermal shocks is an important factor restricting the use of flood cooling. Alternatively, promising results have been achieved recently in MQL and nanofluid-MQL applications particularly on carbide cutting tools. When these methods are used together with ceramic cutting tools, the behavior of ceramic cutters and their effect on machinability outputs is still a matter of curiosity. Therefore, in order to observe the interaction between ceramic cutting tool and minimum quantity lubrication (MQL) and nanofluid-MQL, we investigated the turning performance of PVD TiN coated Al2O3+TiCN ceramic tool under dry, pure-MQL and nanofluid-MQL reinforced by nano-sized solid particles such as graphene nanoplatelets (GNPs) and multi walled carbon nanotubes (MWCNTs). Experiments were carried out to investigate the effect of cooling/lubrication (C/L) environment and cutting parameters on tool life, surface roughness and maximum temperature of chip. In addition, a series of experiments were also made to observe the effect of only C/L environment on the wear behavior of the ceramic tools and the machined surface topography while keeping the cutting parameters constant. As a result, pure-MQL contributed to the reduction of nose wear by about 69% compared to dry machining, while GNPs based nanofluid-MQL helped to reduce the surface roughness by 19.42%.
dc.identifier.doi10.1016/j.jmapro.2020.05.017
dc.identifier.endpage539
dc.identifier.issn1526-6125
dc.identifier.issn2212-4616
dc.identifier.scopus2-s2.0-85084849067
dc.identifier.scopusqualityQ1
dc.identifier.startpage522
dc.identifier.urihttps://doi.org/10.1016/j.jmapro.2020.05.017
dc.identifier.urihttps://hdl.handle.net/11486/6508
dc.identifier.volume56
dc.identifier.wosWOS:000558320300007
dc.identifier.wosqualityQ1
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherElsevier Sci Ltd
dc.relation.ispartofJournal of Manufacturing Processes
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WOS_20250323
dc.subjectNanofluid
dc.subjectGraphene nanoplatelets
dc.subjectMulti walled carbon nanotubes
dc.subjectCeramic cutting tool
dc.subjectMQL
dc.subjectTurning
dc.titleStudy on turning performance of PVD TiN coated Al2O3+TiCN ceramic tool under cutting fluid reinforced by nano-sized solid particles
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu