Deformation Analysis Based on Designed Experiments and Kalman Filter
[ X ]
Tarih
2014
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Croatian Geodetic Soc
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
This paper is focused on the deformation monitoring of survey control points in the Gidan Kwano main campus, Federal University of Technology, Minna, Nigeria. The main objectives are to develop and test a kinematic deformation analysis model using simulated GPS test data. RTK GPS was the main equipment deployed for the monitoring. The kinematic deformation analysis model developed for this study was based on Kalman filtering technique. In order to verify the developed kinematic model, designed experiments, with artificially introduced deformations, were performed to test centimetre-level horizontal movements on four points (GPS 01, GPS 08, GPS 09 and GPS 12). The developed kinematic model was used to determine six unknown parameters of movements, namely position displacements (dx, dy), velocities (Vx, Vy) and accelerations (ax, ay). The results of the computed movement parameters of the control points show that the introduced deformations were detected by the kinematic deformation model. The model also detected that there was no deformation introduced to point GPS 09. Some of the discrepancies in the computed results can be attributed to centring errors during observations.
Açıklama
Anahtar Kelimeler
deformation monitoring, designed experiments, RTK GPS, Kalman filter, kinematic model
Kaynak
Geodetski List
WoS Q Değeri
N/A
Scopus Q Değeri
Q3
Cilt
68
Sayı
4
