Performance and wear analysis in machining of Co-based Haynes 25/L605 superalloy using sustainable cooling/lubrication agencies
[ X ]
Tarih
2025
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Elsevier
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
The cobalt-based Haynes 25 superalloy is a key material in sectors such as aerospace, medical, and energy, known for its outstanding high-temperature strength, wear and corrosion resistance. However, its low thermal conductivity and rapid work hardening rate make it inherently difficult to machine, highlighting the need for new cooling and lubrication methods. This work investigates the machinability of Haynes 25 under various sustainable cooling and lubrication techniques, including dry conditions, minimum quantity lubrication (MQL), nanofluids, and cryogenic COQ. Additionally, hybrid systems combining cryogenic COQ with nanofluids are also being investigated. The effectiveness of these approaches was ascertained by thorough investigations of surface roughness, cutting temperature, tool wear, and its mechanisms, and power consumption. Experimental results show that hybrid cooling systems especially those including nanofluids and cryogenic COQ significantly improve machining performance. Compared to dry machining, these methods minimized tool wear by 38 % and achieved up to a 44 % reduction in cutting temperature and a 32 % reduction in power usage. These results were a result of the enhanced thermal and tribological characteristics of nanofluids along with COQ's fast cooling capacity. This work provides a route toward sustainable and high-performance manufacture of challenging-to-machine materials by highlighting the possibilities of hybrid cooling strategies to maximize machining efficiency, extend tool life, and lower environmental impact.
Açıklama
Anahtar Kelimeler
Co-based Haynes 25, Tool wear, Hybrid cooling/lubrication systems, Wear mechanisms, Surface roughness, Power consumption
Kaynak
Sustainable Materials and Technologies
WoS Q Değeri
Q1
Scopus Q Değeri
Q1
Cilt
43
