Resource conservation and sustainable development in the metal cutting industry within the framework of the green economy concept: An overview and case study

Basit Öğe Kaydı
dc.authoridSarikaya, Murat/0000-0001-6100-0731
dc.contributor.authorKshitij, G.
dc.contributor.authorKhanna, Navneet
dc.contributor.authorYildirim, Cagri Vakkas
dc.contributor.authorDag, Salih
dc.contributor.authorSarikaya, Murat
dc.date.accessioned2025-03-23T19:37:49Z
dc.date.available2025-03-23T19:37:49Z
dc.date.issued2022
dc.departmentSinop Üniversitesi
dc.description.abstractThe metal cutting industry has an important role in the growth of the global economy. In this industry, while research is made on factors such as cutting tool, cooling/lubrication environments, improved cutting parameters, etc., for increased productivity, serious efforts are also made to obtain environmentally friendly and healthy processes. Based on recent developments in tool materials, cutting speeds have increased significantly in machining operations. However, the increased temperatures with increasing cutting speeds have also reduced productivity and caused resource and product losses. The use of cutting fluids, especially in the machining of superalloys, has a vital task in reducing the problems. However, petroleum-based cutting fluids, which are still frequently used and have an important share in the industry, do not comply with the concept of a green economy due to environmental effects and costs. For this reason, the use of sustainable cutting fluids and optimum pa-rameters in metal cutting industry processes has become a necessity. From this perspective, this study was carried out in two stages. In the first stage, the outputs of the metal cutting industry were examined within the scope of the principles of green economy. In the second stage, a case study was then conducted involving the machining of Inconel 718 and Ti6Al4V alloys at different cutting speeds and under LCO2. In the case study, critical outputs, both from an economic and sustainability point of view, namely cutting tool wear, surface roughness, specific energy consumption, machining costs and carbon emissions are examined. The results obtained in the machining of both materials were compared with each other. Total cost and carbon emissions can be reduced by up to 35% and 7%, respectively, under the appropriate parameter combination and LCO2 cooling conditions.
dc.description.sponsorshipScience and Engineering Research Board (SERB) , India; [ECR/2016/000735]
dc.description.sponsorshipAcknowledgements The authors are thankful to the Science and Engineering Research Board (SERB) , India for the financial support given under the Make-in-India project (ECR/2016/000735) .
dc.identifier.doi10.1016/j.susmat.2022.e00507
dc.identifier.issn2214-9937
dc.identifier.scopus2-s2.0-85139844388
dc.identifier.scopusqualityQ1
dc.identifier.urihttps://doi.org/10.1016/j.susmat.2022.e00507
dc.identifier.urihttps://hdl.handle.net/11486/6022
dc.identifier.volume34
dc.identifier.wosWOS:000877301900001
dc.identifier.wosqualityQ1
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherElsevier
dc.relation.ispartofSustainable Materials and Technologies
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WOS_20250323
dc.subjectSustainable manufacturing
dc.subjectGreen economy
dc.subjectMachining
dc.subjectLCO2
dc.subjectInconel 718
dc.subjectTi6Al4V
dc.subjectResource-conservation
dc.titleResource conservation and sustainable development in the metal cutting industry within the framework of the green economy concept: An overview and case study
dc.typeArticle

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu