Deniz, FatihErsanli, Elif Tezel2025-03-232025-03-2320181522-65141549-7879https://doi.org/10.1080/15226514.2017.1337074https://hdl.handle.net/11486/5745A composite phyco-biomass including four different marine macroalgae species (Chaetomorpha sp., Polysiphonia sp., Ulva sp., and Cystoseira sp.) was evaluated as a novel biosorbent for the biosorption of manganese ions from aqueous solution. The experimental studies were performed to optimize the operational factors including solution pH, biosorbent amount, initial manganese concentration, and reaction time in a batch-mode biosorption system. The removal yield of the biosorbent for manganese ions increased with increasing pH, manganese ion concentration, and reaction time, while it decreased as the biosorbent dose increased. The obtained kinetic data indicated that the removal of manganese ions by the biosorbent was best described by the pseudo-second-order model and the pore diffusion also contributed to the biosorption process. The results of isotherm and thermodynamic studies showed that the Freundlich model represented the biosorption equilibrium data well and this biotreatment system was feasible, spontaneous, and physical. The maximum manganese uptake capacity of used biosorbent was found to be 55.874 mg g(-1). Finally, a single-stage batch manganese biosorption system was designed and its kinetic performance was evaluated. All these findings revealed that the prepared composite macroalgae biosorbent has a fairly good potential for the removal of manganese ions from the aqueous medium.eninfo:eu-repo/semantics/closedAccessmanganesemacroalgaecomposite biosorbentbiotreatment systemArticle20213814410.1080/15226514.2017.1337074286215462-s2.0-85051951375Q1WOS:000423504200007Q2